Sign In | Join Free | My phrmg.org
China Shandong Encke Import and Export Co.,Ltd. logo
Shandong Encke Import and Export Co.,Ltd.
Shandong Encke ,professional and advanced biomass wood pellet plant technology design and poineer in waste pellet production of China .
Active Member

5 Years

Home > Ring Die Pellet Machine >

Corn Waste Cotton Stalk Ring Die Pellet Machine 1-10t/h Automated

Shandong Encke Import and Export Co.,Ltd.

Corn Waste Cotton Stalk Ring Die Pellet Machine 1-10t/h Automated

  • 1
  • 2

Brand Name : SZHL

Model Number : 420

Certification : CE ISO SGS

Place of Origin : Liyang ,China

MOQ : 1 sets

Price : 35000-70000USD

Payment Terms : L/C, T/T

Supply Ability : 50 sets per month

Delivery Time : 25 working days

Packaging Details : machine is packed by film ,small parts is in wooden box .

material : corn waste

type : flat die wood pelletizer machine

Related models : 420,508.630.880

voltage : 380v ,400v ,415v ,as requested

roller : two roller/Three roller

capacity : 1-10t/h

ring die material : alloy steel or stainless steel

Name : Corn Waste Cotton Stalk Ring Die Pellet Machine 1-10t/h Automated

Contact Now

Corn Waste Cotton Stalk Ring Die Pellet Machine 1-10t/h Automated

The Ring die pellet machine is used to process Wood,logs,waste wood,tree bark, straw, wheat,straw,rice husk,cotton stalk,coconut juice slag,sunflower,olive pulp,paper,elephant grass,bamboo shavings,bagasse,palm shell, peanut shell,corn cob,soybean pole,weeds,branches,leaves,EFB,olive nut etc.into biomass pellet as burning fuel .

All the raw material's size should be in 3-5mm,if not,it should be prehanding by wood chipper ,hammer mill dryer etc ,and the moisture of the raw material is about 12-18%,the moisture is little different with material .

Introduction of ring die pellet machine


ring die pellet machine is characterized by independent drive on all parts from feeding, mixing to pelleting and lubricating as well as unique ring die assembling and disassembling. The feeder adopts AC magneto in stepless speed regulating. Technically, the feed intake volume can be adjusted in view of the working load. The whole set remarkably possesses elegant structure design, advanced technology, high productivity, lower power consumption and easy operation.

2. The advantage :1. Main drive adopts high accurate gear drive, with an output of about 20% higher than belt drive.
2. The drive part of the machine including motor optimize, the high quality NSK bearings and NAK oil seals ensure high efficient and steady driving with low noise.
3. The imperative feeder device is adopted, which making the machine operate smoothly as the material like wood sawdust, corn, wheat, and rice straw is very light, so they are needed to be pushed into pelletizing chamber by force.
4. The ring die is made by international advanced technology, has long service life and ensure smoothly pelletizing and high quality.
5. The international advanced compensation type flexible coupling is of novel and compact structure, safety, low noise and less trouble.

Ring die pellet machine technical parameter

Name Main motor Capacity Inner Ring die Dimension Total weight

SZHL420

90KW

1-1.5T/H

420MM

2600*1300*2300MM

3T

SZHL508

132KW

1.5-2T/H

508MM

3150*1250*2300MM

3.5TON

SZHL630

160KW

2-2.5T/H

630MM

4200*1500*2200

10TON

SZHL880

220KW

2.5-3.5T/H

880MM

4000*2000*2400

14TON

Remarks

◆ The above capacity comes from 8mm biomass pellets production.

◆ The final capacity of Pellet Mill depends on the features of raw materials, operation and maintenance,etc.

◆ There are 2/3 rollers in the pressing chamber.

Reduction box: equipped with a pair of gear. When the main motor starts, driving force will be transferred to the main shaft via the coupling, featuring lower noise and less vibration. The ring die tightened on the end of the main shaft by the hold hoop will gyrate following the shaft.

Pelleting system: the eccentric shaft is supported by bearing and safety device. On the left is a pair of roller equipped on the eccentric shaft. The nip between rollers and the die can be regulated by adjusting the 4 nuts on the two long bolts. Specifically, the distance (also the nip) shall remain at 0.1mm to 0.3mm.

Press rollers: the rollers are sitting on the eccentric shaft via a bearing respectively and the bearing can be lubricated through the central oil duct connected directly with the backside grease pump for continuously periodic lubrication during pelletizing. Bearings are sealed up at both ends of the eccentric shaft. The housing of the shaft is also forged with high quality alloy steel and advanced heat treatment for better working performance.

630 /880 is vertical type ,no roller bearing in the chamber ,no grease consumption new type pellet machine .

The key point :ring die

1. Material of the ring die: X46Cr13 /4Cr13(stainless steel), 20MnCr5/20CrMnTi (alloy steel) or customized

2. Hardness of ring dies: HRC54-60.

3. Diameter of ring die can do: 1.0mm up to 28mm

4. Pellet die type can do: Ring Die or Flat Die

5. Outer diameter can do: Outer diameter up to 1800mm

6. Pellet Die model we can customize as your specified drawing .

Alloy structural steels, such as 20CrMnTi, 40Cr, 35CrMo, have hardness of heat treatment above HRC50 and good comprehensive mechanical properties. The ring die made of these materials has high strength and good wear resistance, but its shortcoming is poor corrosion resistance. Stainless steel materials are X46Cr13 (German brand), 4Cr13, 3Cr13, etc. These materials are rigid. The hardness of heat treatment is higher than HRC50, and it has good wear resistance and corrosion resistance. It has a long service life.

Our producing base is in Liyang ,Jiangsu ,which is known as town of pellet mill .We have experienced processing equipment and engineer ,for the material ,each chemical ingredients will influence the durability of ring die ,what we used material provided by best and large scale supplier in Liyang .

Our factory :

Shandong Encke factory is a leading manufacturer of machinery in China devoted to environmental protection, conservation and green energy. Its facility is located in Liyang ,Jiangsu province ,China .Encke manages its own R&D center and for many years has cooperated with a number of external R&D teams at institutions of higher education. After years of development, the company has perfected its processes of design, manufacture, installation, technical training and after sales service.

Corn Waste Cotton Stalk Ring Die Pellet Machine 1-10t/h Automated


Product Tags:

wood pellet plant

      

biomass pellet press machine

      
 Corn Waste Cotton Stalk Ring Die Pellet Machine 1-10t/h Automated Manufactures

Corn Waste Cotton Stalk Ring Die Pellet Machine 1-10t/h Automated Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Shandong Encke Import and Export Co.,Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)